Hopefully, fixing a hole in the wall with some basic supplies is an easy task. It is something you could probably do on your own, probably for less than $20 and in less than 2 hours to complete. However, for a more severe abrasion, such as a standard double-sided screw-size hole, you might need to use special joint compound to fill the crack. For this repair, it is strongly recommended to hire an experienced Atlanta home improvement contractor who will be able to assess the damage, determine the best fix, and then make sure you are following the recommended procedures.

The most common scenario for holes in the wall involves plaster, perhaps created when painting an area that did not get covered up properly. Sometimes, small holes get left by the homeowner’s own attempts at covering them up, but these typically close up after a couple of weeks anyway. In these cases, contact the Atlanta interior finishing group you contacted to see if they would be willing to come out and take a look. They should have plenty of tools and resources on hand. If you are worried about damaging the walls while trying to mend the hole, a local company may be able to perform the patching instead.

A hole may have been made by some previous repair attempt, perhaps a plumbing or electrical issue, or maybe it was created by a tree branch clipping down on the house. There are literally hundreds of possible reasons why a hole could have occurred. When you contact the Atlanta contractors, ask them to pinpoint exactly what caused the hole. They will probably tell you that it was caused by one of a number of small issues, such as settling, expansion, or some other problem with the drywall.

When you finally locate the source of the problem, you might discover that the only way to fix the hole is to add some filler to the area. This is commonly referred to as patching. You need to find a filler that matches the color and texture of the drywall, and it must be the right density to make it as effective as possible. You do not want to use anything that will cause the hole to become even larger, so patching a big hole in the wall may not be the best way to go.

What kind of patching substance to use will depend upon the specific problem you are attempting to solve. If you are simply patching up a small hole in the drywall, some people might suggest putting down some type of plastic binder or similar product. Other people may recommend a cement mixture or even epoxy putty. However, the one thing that these substances have in common is that they will all create a mess. In addition, if you decide to use cement, it is imperative that you only mix a small amount at first, or else the cement could crumble and become unstable. This can cause damage to your wall and floor, if it happens to fall through when you try to reposition it.

If you need help in fixing a hole in the wall, then you should ask for advice from a professional. They will know which products to use and how far to stretch them. They may even have some tips and tricks to make the job go faster. There are many reasons why homeowners choose to fix their own holes, but repairing the damaged area may be the last resort. If you are fixing a big hole, then you may have to cut away portions of the drywall to get at the issue beneath it. This is usually a job best left to a professional.